Motorola APX 6000 3 User Manual Download Page 5

Page: 5 / 146

6.7.3 Exiting Emergency Operation.................................................................................. 65

6.7.4 Exiting Emergency as Supervisor (Trunking Only).................................................. 65

6.7.5 Sending an Emergency Alarm................................................................................. 66

6.7.6 Sending an Emergency Call (Trunking Only)...........................................................66

6.7.7 Sending An Emergency Call With Hot Mic (Trunking Only).....................................67

6.7.8 Sending an Emergency Alarm with Emergency Call............................................... 67

6.7.9 Sending An Emergency Alarm and Call with Hot Mic.............................................. 68

6.7.10 Sending a Silent Emergency Alarm....................................................................... 69

6.7.11 Emergency Find Me...............................................................................................69

6.7.11.1 Sending and Receiving Emergency Find Me Beacon..............................69

6.8 Fireground............................................................................................................................. 69

6.8.1 Entering Fireground Zone Channel (Conventional)................................................. 70

6.8.2 Sending Evacuation Tone........................................................................................71

6.8.3 Responding to Evacuation Indicator........................................................................ 71

6.9 Tactical Public Safety (TPS) (Conventional Only)................................................................. 71

6.9.1 Using TPS Normal Transmission.............................................................................71

6.9.2 Using TPS Emergency Transmission...................................................................... 72

6.10 Man Down............................................................................................................................72

6.10.1 Radio Alerts When Man Down is Triggered...........................................................72

6.10.2 Testing the Man Down Feature..............................................................................73

6.10.3 Exiting Man Down.................................................................................................. 73

6.10.4 Re-Initiating Man Down..........................................................................................73

6.11 Automatic Registration Service............................................................................................73

6.11.1 Selecting or Changing the ARS Mode................................................................... 74

6.11.2 User Login Feature................................................................................................ 74

6.11.2.1 Logging In as a User................................................................................ 74

6.11.2.2 Logging Out..............................................................................................75

6.12 Text Messaging Service...................................................................................................... 76

6.12.1 Sending a Quick Text Message............................................................................. 76

6.12.2 Priority Status and Request Reply of a New Text Message.................................. 77

6.12.2.1 Appending a Priority Status to a Text Message....................................... 77

6.12.2.2 Removing a Priority Status from a Text Message....................................77

6.12.2.3 Appending a Request Reply to a Text Message......................................77

6.12.2.4 Removing a Request Reply from a Text Message...................................77

6.12.2.5 Appending a Priority Status and a Reply Request to a Text Message.... 78

6.12.2.6 Removing a Priority Status and a Reply Request from a Text

Message............................................................................................................78

6.12.2.7 Receiving a Text Message.......................................................................78

6.12.2.8 Viewing a Text Message from the Inbox.................................................. 78

6.12.2.9 Replying to a Received Text Message.....................................................79

MN004476A01-AE

Contents

Summary of Contents for APX 6000 3


















































































































































Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands

Motorola APX 6000 3, User Manual

Search results

Summary of Contents for APX 6000 3

Reviews:

Related manuals for APX 6000 3

Brands by name

Popular brands