46
Motion Computing LE-Series and LS-Series Tablet PCs User Guide
Basic setup includes:
• Enrolling (your username and password)
• Selecting a finger
• Capturing a fingerprint
• Capturing a second fingerprint
Advanced OmniPass setup features include:
• User management
• User settings
• System settings
• You can modify the Motion OmniPass startup options
• You can enable Strong Logon Security to authenticate with a specific
security device before showing the windows desktop
• Vault management
• The vault is a storage area for passwords and dialogs that you have
associated with web sites and applications.
• Encrypting and decrypting files
• You can encrypt any file on your Tablet PC except for system files.
• Only an authenticated user can decrypt files that have been encrypted.
Descriptions of these features may be found in the Motion OmniPass Help section
(open
Motion Dashboard
then
Security Center
panel
> Motion OmniPass
and
tap the
Help
icon in that window).
Helpful Hints: Successful Fingerprint Captures
• Be consistent. Hold your finger and scan at the same angle each time. For
example, if you enroll your finger with your hand open (or closed), hold your
hand this way each time you scan. If you enroll your thumb while holding the
edge of the Tablet PC while scanning, you need to scan like this each time.
• The scanner is bi-directional; you can move your finger from right-to-left or left-
to-right.
• Read the prompts carefully and make sure you are waiting to be prompted
before each swipe.
• Swiping too fast or too slow can make a capture unsuccessful. Change the
swipe speed until you learn what speed works best.
• When scanning, press hard enough to fully contact both the nickel-colored ring
and the sensor; you do not have to press hard.
• Rub your fingers together to stimulate the natural skin oils so your fingerprint is
easier for the sensor to detect. Conversely, wipe your finger off so nothing
interferes with the scan.
• If you are repeatedly having trouble getting a good scan, you may need to
clean the sensor. First, power down the Tablet PC and remove the battery.
Then, clean the sensor using a cotton swab sprayed with a
window-type cleaner (no bleach, solvents, or abrasives); then dry the sensor.
Do not spray, pour, or otherwise dispense any liquid directly on the sensor.
• If you are having trouble enrolling a specific finger, enroll a different finger.
Typically, you will get the best results by scanning an index finger, thumb,
middle finger, ring finger, and little finger in that order.
