www.miinet.com
Moore Industries-International, Inc.
- 30 -
User’s Manual
224-790-00K
May 2018
Programmable Limit Alarm Trips
SPA
2
SECTION 4
Configuring the TPRG Sensor
Figure 4.5. gives an overview of the Input Configuration menu.
If the Password Jumper is not installed, the password sub-menu is bypassed, and the “CONFG
INPUT” menu is accessed by pressing
SELECT
from the process variable display.
1. From the “CONFG SENSR” display, press
SELECT
.
2. At “SENSR TYPE” press SELECT. Use the
UP or DOWN
arrow buttons to scroll through the
options in the “Sensor Selection List” box shown in Figure 4.5, for input type. The default
display for this menu is always the last setting.
3. When the display shows the type of input that you choose to use, press SELECT.
4. Depending on the type of input sensor you choose you may then be presented with a sub-
menu where you can further refine your choice of sensor type. For example: if you choose
“T/C+RJC” you will then be presented with sub-menu where you can choose the type of
thermocouple you will be using.
5. If a Resistance range was selected as your input, and you are using dual sensors, you will
need to choose whether you want to view your process variable in an average (PV AVG) or
differential (PV DIFF) display; press
SELECT
.
6. “EXIT SENSR” appears. If all values in this parameter have been set, press
SELECT
. If not,
return to the menu and set your values.
7. The next display is the menu for the selection of functional options, ”CONFG OPTNS”. To skip
the rest of the configuration menus and return to the process variable display, press the UP
button twice (to “CONFG EXIT”), and press SELECT.
