5.2.
Dx2020 GUI
5.2.1.
General description
For the setup and "troubleshooting" operations a graphic interface software called Dx2020 GUI is available, which allows
to set and modify the parameters, the configuration of the drives and the upgrade of the SW versions if necessary.
The main features are:
• System configuration with access to the basic system parameters (transducers, digital and analogue I/Os, motor parameters,
etc.)
• Calibration of the speed and position loops to personalise and optimise the drive response
• Direct control of the drive (jog mode, speed profile with internal generator)
• Commissioning
• Diagnostics
• Monitoring of the drive's internal variables and of the I/O signals
• Registration of the centre distance sizes via external memory support (SD card available only for DM2020)
• Signal visualisation on 4-track digital oscilloscope
• Firmware updating, drive parameter management (saving, backup, etc.)
5.2.2.
Minimum PC requirements
• Pentium® 1 GHz processor or higher
• 512 MB of RAM
• 150 MB of free disk space
• Architectures supported x86 and x64
• Network connection for software download
• USB port , Ethernet port, CAN interface (IXXAT)
In order to function, the GUI uses the libraries .NET Framework 4.0, which have the following minimum space requirements
• x86: 600 MB of free disk space
• x64: 1.5 MB of free disk space
Operating systems
INFORM
ATION
There are some versions of Windows XP that are NOT supported by the .NET Framework 4.0; in this case it is not possible to install
the GUI or use it.
Windows 8 and Windows 8.1, have already pre-installed the .NET Framework 4.5 libraries which are nothing more than a
update of 4.0.; Therefore, users who own these versions of Windows can download the installer in
"no_net" version, without
the .NET Framework 4.0.
46
• Windows XP Home eEdition (Service Pack 3)
• Windows XP Professional (Service Pack 3)
• Windows XP Professional x64 Edition (Service Pack 3)
• Windows Vista
• Windows 7
• Windows 8
• Windows 8.1
• Windows 10
INFORMATION
Some PCs may require administration rights, both for installing and running the program
INFORMATION
If the SW system configuration does not satisfy the requirements indicated, it can be updated via the Microsoft Update site or via
the update utility installed on the operating system
The following notes refer to a single-axis con
�
guration; For a dual-axis con
�
guration, the same considerations apply.
MAR2-E-191
46
fi
fi
