© MOOG 2019
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
62
MRJ06301
“Please edit file name Yes/No
”
If you select “
No
” then follow the instructions below..
The LCD display (Figure 2-22,Figure 2-23,Figure 2-24) shows the description of the file data, press SET
at
“
Next
” to see each display one by one.
To save the file, move cursor to
“
Save
” with
Rotaly Knob
and press
SET
Key or directly
touch “Save”.
If you select “
Save
”, the DigiPack
Ⅲ
saves the data in the Flash RAM (or to the USB Memory if you
selected Save USB) and displays the save data in the
Profile
mode. (
F1: Profile
).
If you select “
Quit
” the first screen of the
F3 File
mode is displayed and no data is saved.
The data will automatically be saved in the same
“
FILE Number
” file shown in the LCD display
even if data is already stored there. In this case, the previously stored data will be lost.
Figure 2-22 File Description
Data-Page 1
Figure 2-23 File Description
Data-Page 2
Figure 2-24 File Description
Data-Page 3
