© MOOG 2019
This document is subject to MOOG INTELLECTUAL AND PROPRIETARY INFORMATION LEGEND . The details are on page II.
48
MRJ06301
2-3.
MAN MACHINE INTERFACE
288.00 mm
LCD Touch screen 10.1 (WVGA)
青色画面時 (RGB: 183.221.232)
DigiPack
Ⅲ
Parison Controller
MOOG
0%
25%
50%
75%
100%
100
90
80
70
60
50
40
30
20
10
1
File Name:1234567890123456
Point No.
Die gap
Delay
Auto cycle
72
5.0
1.5
ON
%
sec
Data
Weight
Range H
Range L
* 79.0
0.0
0.0
0.0
%
%
%
%
5
6
Start
Die gap
Continuous
Accumulator
Divergent
Convergent
End of filling
Point out
End of
extrusion
F1 : Profile
F2 : Marker
F3 : File
F4 : Monitor
F5 : Data
Cursor
DEL
Shift
X10
Set
2018/1/23 13:35:45
Cycle time
10.0
100% =
25.40
m
m
sec
Figure 2-6 DigiPack
Ⅲ
Front panel
2-3-1. OPERATOR CONTROL
The operator sets and monitors the parison thickness program using the display (editing area, status mon-
itoring area, function switch, other switches) and rotaly knobs on the DigiPack
Ⅲ
front panel shown in
All functions normally required for parison and machine programming can be used on the front panel.
2-3-2. INPUT FUNCTION
Rotaly knob (numerical input)
：
It is used to input values of various functions, turning clockwise increases the value of the function, turning
counterclockwise decreases the value. When the "X10" key on the screen is active (inverted to yellow),
the sensitivity when the input knob is rotated is multiplied by 10.
Setting value by ten key (10 key) :
In addition to the method by pressing [SET] after increasing / decreasing the value by the rotaly knob, you
can input with the numeric keypad displayed on the screen to set the value. If you select a parameter and
rotate the rotaly knob, the selected parameter value will be enlarged as shown in Figure 2-7. This value
increases or decreases following the rotation of the rotary knob. Also, if you touch the selected parameter
again, the numeric keypad will be displayed. In this case, the numeric keypad becomes active from the
beginning as shown in Figure 2-8.
If you press "ESC" or touch anything other than the numeric keypad area, the screen returns to Figure 2-6
without changing the value. Press the "SET" key to update the value and return to Figure 2-6.
Rotaly Knob
USB slot
Beep sound speaker
Edit area
Switched by
F1 to F5
Other
Switches
Power LED
State monitoring area
Function
Switches
