Installation and Setup of the AquaMax® Microplate Washer
88
0112-0133 Rev B
Figure 4-8
Connecting serial cable to the StakMax
®
instrument
.
9.
Plug the power connector into the StakMax instrument. See
.
Figure 4-9
Connecting power to the StakMax
®
instrument
.
10.
To reset and turn on the StakMax system, press the green button
on the front, left side of the StakMax instrument.
11.
To turn on the AquaMax washer, use the switch next to the power
inlet on the back panel of the AquaMax instrument.
12.
For further information on setting up the StakMax system for use
with the AquaMax washer, see the
AquaMax
®
User Guide
.
Summary of Contents for StakMax
