Installation and Setup of SpectraMax® L instrument
50
0112-0133 Rev B
To unpack the StakMax
®
instrument
1.
After examining the carton, place it on the floor in an upright
position.
2.
Open the top of the box and remove the top lid.
3.
Remove the inner instrument box from the shipping box and place
it on the lab bench.
4.
Open the top of the box. Carefully remove the 20-plate magazines
(if ordered) and remove them from the packaging. If other
magazine sizes were ordered they are shipped in a second box.
5.
Remove the accessory kit. Check to make sure that all of the
, for a
complete list of the included components.
6.
Carefully remove the StakMax instrument from the box and place
it on a flat surface.
7.
Gently pull up the foam block at a slight angle and remove it from
the input stack. See
.
WARNING! The StakMax instrument weighs approximately 26 pounds
(11.8 kg) and should be lifted with care. Take proper precautions to avoid
injury.
Summary of Contents for StakMax
