Operation
104
0112-0133 Rev B
Single Plate Loading Tool
Place the single plate loading tool into the input area of the stacker. Load
a single plate in the opening. See
Figure 5-16
(A) Single plate loading tool, (B) inserting the tool, (C)
loading a plate.
The StakMax
®
Software Interface
This section describes the main elements of the StakMax software
interface. You can use the StakMax software to manually control basic
stacker functions, for example, starting and stopping plate reads, moving
plates from the reader to the input or output stacks, and moving plates
within the stacker. You can use more advanced functions, such as
scripting, if you want to create and run your own scripts with automation
instead of running plates from the main window.
Use the main StakMax software interface (see
) to control the
StakMax instrument. Each of the available functions is described in this
section.
A
B
C
Summary of Contents for StakMax
