Manager Mode - Holding Cabinet Settings / Programming
19
C
HANGE
P
ASSCODE
S
CREEN
.
Press to change passcode. Numeric key pad
will display.
The ‘Change Passcode - Manager’ screen will appear.
Press to enter the Change Passcode,
screen.
Press to enter new Passcode,
numeric key pad will display.
On completion Press to verify new
passcode.
Press to confirm.
Press to cancel.
A
UTOSTART
S
CREEN
.
Press to enable / disable Autostart mode.
Press to set Autostart time.
Enter time on keypad and confirm setting.
Press to set Autostart temperature. Enter
temperature on keypad and confirm setting.
Autostart Temp Range = 60 - 90°C / 140 - 194°F
Press to confirm.
Press to cancel.
Press to set Autostart humidity. Enter
humidity level on keypad and confirm setting.
Autostart Humidity Range= 10 - 85°C / 50 - 185°F
Press to confirm.
Press to cancel.
S
YSTEM
S
CREEN
.
Screen displays controller system information.
(This Screen shown as an example).
Press to change from AM to PM.
Press for next / previous
MANAGER screen.
Press to exit ‘Manager’ screen and
return to ‘Main’ screen.
Press on ‘Change Passcode’ screen
to return to Manager Screen 5.
Press on ‘Change Passcode’ screen
to return to previous screen.
Press on ‘Autostart’ screen to
return to Manager Screen 5.
Press on ‘System’ screen to return
to Manager Screen 5.
Press to exit ‘Manager’ screen and
return to ‘Main’ screen.
