1
www.UsePhoenix.com • [email protected]
Toll-Free 1-800-533-7533
Owner’s Manual — Phoenix D385
Installation, Operation & Service Instructions
Read and Save These Instructions
The Phoenix D385 provides the perfect combination of
features and performance the restoration industry has been
craving in a desiccant dehumidifier. Designed to operate
vertically or horizontally, the Phoenix D385 provides the
wide operating range and ultra-low grains of a desiccant with
the water removal capacity of the largest LGR’s in cabinet
dimensions identical to our popular Phoenix
200 Max.
The D385 delivers 385 CFM of ultra-low grain process air and
removes an incredible 130 pints per day at AHAM conditions.
The true four hole configuration* allows the Phoenix D385 to
be located in the affected area with the 75 CFM re-activation
air stream isolated from the drying chamber. Three hole
designed units** inherently pull unaffected and/or outside
air into the drying chamber. The D385’s four hole design
allows the restoration contractor to set-up for effective
positive, neutral or negative pressure operation.
Able to operate vertically or horizontally, the D385 will fit
inside most crawlspaces. Having the D385 securely inside,
rather than outside the crawlspace access, deters the
possibility of tampering with the dehumidifier or the set-up.
The 385 CFM of process air will provide 3 ACH on an affected
area up to 7000 cubic feet.
The Phoenix D385 is easy to transport and set-up. The
D385 will fit on your truck in the areas already designed
for your LGR’s and will move around the jobsite with the
same portability. All the power to the unit is provided by
two 115 volt grounded power cords. Simply plug the cords
into separate 15 amp circuits. Each cord draws only 12
amps to power the D385. The re-activation air stream is
ducted through 6” flex duct provided with the unit and stores
conveniently in the top of the unit.
*Having completely separate process and regeneration airstreams.
**Where regeneration airstream is pulled from the process airstream.
The Phoenix D385 Desiccant Dehumidifier
• Ultra low grains
• Wide operating range
• 130 pints per day @ AHAM
• Operates vertically or horizontally
• Process airflow 385 CFM
• Two 23’ power cords:
12 Amps per cord
24 Amps
115 Volts/60 Hz
• Unlimited ducting possibilities
• Legendary stainless construction
Phoenix D385
PN
4026700
Specifications subject to change without notice.
TS-387
03/17
4201 Lien Rd • Madison, WI 53704
