07/04 AWB2700-1428GB
Basic menu
49
After a power failure, the PLC will start up in the mode specified
by the OMS setting when the password was activated, irrespective
of the current setting. The status and parameters can only be
modified after the password is entered.
Entering and activating a password:
X
Choose DEVICE/SECURITY/PASSWORD.
X
Turn the MSS until the display shows EDIT.
X
Press the MSS.
X
Turn and press the MSS to enter each character of the
password. You can enter up to 10 alphanumeric characters.
X
Pressing the MSS while ENTER is displayed will accept the
password.
X
Select the menu item ACTIVATE.
X
Press the MSS.
X
Turn the MSS until the display shows ACTIVATE.
X
Press the MSS. The word ENTER will appear on the display.
X
Press the MSS once more. The display will return to the basic
menu.
Operation after starting up the PLC:
After the startup the display will show, for example:
The program is processed and the RUN LED lights up.
You can only reach the main menu by entering the password:
X
Turn the MSS so that the display shows PASSWORD. Press the
MSS so that the display is shown:
If the position of the OMS was changed, a message will indicate
how the OMS should be set, such as Key: “RUNP”. Switch the
OMS to this position to clear the message.
X
Enter the password.
X
Turn the MSS until the display shows EDIT.
X
Turn and press the MSS to enter each character of the
password. The text ENTER will appear after the password has
been entered.
X
Press the MSS. The display will switch to the basic menu and the
submenus.
Entering an incorrect password will return you to the basic menu.
LANGUAGE
SOFTWARE
The software versions for the individual modules are shown in this
display. The CPU module is not listed.
Example for an operator module:
Turning the MSS will display the modules XC_XION and
XC_NET_0/1/2.
The number 1 in the designation XC-NET-1 indicates the module
(address):
Time
PLC status (irrespective of OMS)
Program name
Menu entry
! =Event
+ = Password active
R = RUN (OMS)
PASSWORD:
BACK
ACTIVATE:
ACTIVATE
BACK
17:10:37 !+R
RUN
PRONAM.PRO
MAIN MENU
Number
(Hardware) address of the module
0
CE000
1
CC000
2
D4000
PASSWORD:
***
BACK
LANGUAGE:
ENGLISH
GERMAN
BACK
XC_SYS
V01.00A
BACK
Summary of Contents for XControl XC600
