Moeller XControl XC600, Hardware, Engineering And Function Description, Page: 51 / 78

07/04 AWB2700-1428GB
Basic menu
47
MAIN MENU: PROGRAM
RESET
This menu contains various RESET functions:
RESET WARM and RESET COLD switch the PLC into the STOP
status. RESET HARD deletes the executable program and
deactivates the bootable program. The table shows the behaviour
of the variables:
INTERNAL/EXTERNAL
The menus have the same structure.
DISPLAY: calling the DISPLAY function by pressing the MSS will
display the names of the programs stored in the memory:
Only three program names can be displayed. If there are more
programs in the memory, they can be displayed by turning the
MSS. If there is a full-stop character next to the first program
name, this indicates that an executable version of the program is
in the working memory. You can reach the menu above by
pressing the MSS if the cursor is flashing next to a program name.
You must then press the MSS once more.
ACTIVATE: If there are several programs on the hard disk of the
PLC or on the CompactFlash card, you can use this command to
activate a bootable program. A program that is already activated
will be deactivated. A program that is currently being processed
will continue to run.
Every time the XC600 is switched on and the LOAD or REBOOT
menu items are called, the PLC generates an executable program
from the activated program and stores it in the working memory.
This will overwrite any executable program that is present.
The program in the working memory can then be started.
ACTIVATE, COPY and DELETE: After calling these functions, you
will see the program name of the executable program with a full-
stop character in front of it.
X
Turning the MSS further will display all programs stored in the
memory, one after another.
X
Select a program by pressing the MSS.
X
Turn the MSS so that the menu item ENTER appears instead of
menu item BACK.
X
Press the MSS.
The function will be executed and you will reach the menu above.
COPY: Call COPY to copy the program between the various types
of memory:
Hard disk <-> CompactFlash card.
DELETE: After calling EXTERNAL/INTERNAL, the DELETE function
displays the first bootable program located on the hard disk
(internal) or on the CompactFlash card (external). If the memory
medium contains several programs, they can be shown by turning
the MSS. They can be deleted, one after another. After the
program name appears, press the MSS and turn it until ENTER is
shown. Then press the MSS once more. The delete operation is
then executed and the next higher menu is displayed.
LOAD
After the LOAD menu is called, the PLC will create an executable
program from the activated program, which it will store in the
working memory.
This will overwrite any executable program that is present. The
program in the working memory can then be started.
Declared variables RESET
WARM COLD
RETAIN – Initialised
PERSISTENT Initialised –
RETAIN PERSISTENT – –
PROGRAM:
RESET
INTERNAL
EXTERNAL
LOAD
BACK
RESET:
WARM
COLD
HARD
BACK
PROG-INTERN:
DISPLAY
ACTIVATE
COPY
DELETE
BACK
PROGNAM1
PROGNAM2
PROGNAM3
BACK
h An activated program is always “warm”-started at
power-on.