Moeller XControl XC600, Hardware, Engineering And Function Description, Page: 46 / 78

Functions of the Operator
Module
07/04 AWB2700-1428GB
42
Executing the MRES function on the OMS
This function starts a RESET COLD.
Example: the display shows the basic menu:
X
Switch the OMS from the STOP position to MRES.
The display will show a solid black rectangle instead of the S:
X
Leave the OMS in the MRES position until an empty rectangle is
shown.
This change will show that the function has been completed.
Handling several programs
Several bootable programs can be loaded and stored on the hard
disk of the XC600. The last program loaded is activated by the
system. A program that is already activated will be deactivated.
Every time the XC600 is switched on and the LOAD or REBOOT
menu items are called, the PLC generates an executable program
from the activated program and stores it in the working memory.
This will overwrite any executable program that is present.
The program in the working memory can then be started.
A program can be changed by activating the required program:
X
Use the MSS to choose MAIN MENU r PROGRAM r INTERNAL
r ACTIVATE.
The name of the loaded and executable program is displayed. It is
marked by a large full-stop character.
X
Turn the MSS to the right.
The names of other programs will appear in turn.
X
Select a name
(cursor flashes at the side of the name).
X
Press the MSS. Turn the MSS so that the text ENTER appears
instead of the menu item BACK.
X
Press the MSS.
This will display the next higher menu.
X
Carry out a restart with the OMS set to RUN-P or RUN, or
choose LOAD or switch the XC600 off and on again.
The new program will be started.
Deleting programs
Programs are basically deleted in the same way as previously
described.
Both the activated bootable program as well as another bootable
program can be deleted.
Copying programs
Copying is possible between the hard disk and the CompactFlash
card:
If you wish to copy from the hard disk:
X
Use the MSS to choose MAIN MENU r PROGRAM r INTERNAL
r COPY.
If you wish to copy from the CompactFlash card:
X
Use the MSS to choose MAIN MENU r PROGRAM r
EXTERNAL r COPY.
The name of the loaded and executable program is displayed. It is
marked by a large full-stop character.
X
Turn the MSS to the right.
The names of other programs will appear in turn.
X
Select a name (cursor flashes at the side of the name).
X
Press the MSS. Turn the MSS so that the text ENTER appears
instead of the menu item BACK. Press the MSS.
The next higher menu is displayed and the copy operation is
completed.
17:22:24 S
STOP
PRONAM.PRO
>MAIN MENU
17:22:35 '
STOP
PRONAM.PRO
>MAIN MENU
17:22:37 #
STOP
PRONAM.PRO
>MAIN MENU
h Only one single executable program can be activated at a
time!
h Only bootable programs can be copied!