Moeller XControl XC600, Hardware, Engineering And Function Description, Page: 29 / 78

07/04 AWB2700-1428GB
Creating the connection
between PC and XC600
25
You can change the name of the channel (Local_), e.g. to “XC600
Route”. Mark the name “Tcp/Ip (Level2Route)” and press OK.
After pressing OK the name “Channels” appears in the field.
X
Replace the “localhost” value on the “Address” line by
the PLC address 192.168.119.004 and confirm with OK.
X
Confirm the set parameters.
X
In order to register the new channel for the gateway you must
log into the PLC via the Online menu.
The Login function also loads the project into the PLC.
X
Log out again.
The channel is also displayed for control purposes in the
Communication Parameters menu.
Figure 36 : Determine the channel
Figure 37 : Changing channel names
Figure 38 : Enter PLC address
Figure 39 : Display of the channel in the Communication Parameters
window