Mocom millenium B2, Operating Manual, Page: 30 / 96

6. CONFIGURATION
25
Confirm with the
↵
key.
NOTE
T
O CHANGE THE PASSWORD
,
FIRST SELECT THE
DISABLE
OPTION
,
WHICH CANCELS
THE PREVIOUS PASSWORD
,
AND THEN SELECT THE
ANY POWER-ON
OR
ANY
CYCLE START
OPTION
,
ENTERING THE NEW PASSWORD AS DESCRIBED ABOVE
.
Setting the sterilization
programs
(PROGRAMS on the
ADVANCED menu)
The program setting and their storing in four pre-set positions is achieved in various steps
using several menus in sequence.
Each pre-set position can be associated to a standard or user configurable cycle (CUSTOM).
Let's look at the two cases separately.
To associate a standard program and define several of its parameters, proceed as follows:
1. Select PROGRAMS using the
↵
key; the following menu appears:
→ 1 s t P R E S E T +
2 n d P R E S E T ↑
3 r d P R E S E T ↓
4 t h P R E S E T -
E X I T
Define the position (1, 2, 3 or 4) to which the sterilization program will be associated using
the + and - keys. Confirm with the
↵
key.
2. From here, you enter the list of available cycles:
→ 1 3 4 ° C H O L L O W +
1 2 1 ° C H O L L O W ↑
1 3 4 ° C S O L I D
↓
1 2 1 ° C S O L I D -
1 3 4 ° C E M E R G E N C Y
1 3 4 ° C W R A P P E D
1 2 1 ° C W R A P P E D
1 3 4 ° C P O R O U S
1 2 1 ° C P O R O U S
1 3 4 ° C P R I O N
X X X ° C C U S T O M
E X I T
Using the + and - keys, scroll the list until you identify the sterilization program desired.
3. Confirm the selection with the
↵
key.
When the PRION program is selected, you will go to a screen for selecting the sterilization time.
T I M E : X X m i n
+ / - t o s e t
↵ t o e n t e r
Ç
t o e x i t
A value can be set, starting from 18 minutes.