Operating instructions CLIMACELL Page 8
V 1.07_Blue Line CLIMACELL_PCH_en_np_mmm
!
0208
3.3 Operating
panel
1
key of activation of setting-up mode
2/4 cursor steering turning to the left/right
3
setting-up value in parameter
5
key starting the program
6
switch (ON - on, OFF - stand by)
7
indicator light - shines after switching on the switch
8
indicator light heating - shines: state of temperature regulator - heating active
9
indicator light cooling - shines: state of temperature regulator - cooling active
10 indicator light – failure
11 indicator light of safety thermostat - shines: temperature surpassed the limit set on the safety
thermostat - heating is off / see paragraph
4.1.8 Set safety thermostat
12 Display
13 port for inserting the chip card
Segment: partial or full graphic representation of the program coarse
Segment : l’affichage graphique du parcour du programme parciel ou total
°C: temperature display
"
: process time
: fan speed display in % (steps of 10 %)
RH – relative humidity
☼
- setting-up intensity of exposition light in the door
56 - positions are used for specific purposes - see descriptions in text
