MKS P9B, Instruction Manual, Page: 70 / 112

Chapter Six: Embedded Web-Based GUI and Diagnostics Monitor Mode
60
Figure 17: Embedded GUI, MFC Device Page in Monitor Mode
Plot Page – Monitor Mode
This page enables you to plot and see real-time performance of the device. In Monitor Mode you are able to
select variables to plot, the rate at which to display them, and save the data that has been plotted.
Note
The Plot Page requires a java applet to use the plot program. This applet, which must be installed
on the computer trying to view the page, can be downloaded by following the instructions listed
on page 57.
Selecting Variables To Plot
On the right-hand side of the Plot page you should see the Variables section. Here you have the ability to
select one or more variables to plot.
•
To plot one variable:
click on the variable you wish to plot.
•
To plot two or more variables:
either select the variables one-by-one while holding your keyboard’s
control “Ctrl” key down or select all the variables by selecting the first variable in the list and then
selecting the last variable listed while holding your keyboard’s “Shift” key down.