MKS P9B, Instruction Manual, Page: 66 / 112

Chapter Five: Ethernet Interface
Setup and Configuration Digital Interface Input and Output Options
56
10. Verify you’re on the “IP Settings” tab and then do the following to configure your computer to talk to the
MFC and any other devices with an IP address:
o
Click “Add…” in the “IP address” section and enter the IP address
192.168.0.10
. Now click in the
Subnet mask field and the Subnet mask 255.255.255.0 should appear. Change this value to
255.255.0.0. Then click “OK.”
11. Now click “Add…” in the “Default gateways” group. Enter the Gateway value you will use to connect to
the MFC. Typically a gateway value will be the IP address with a (1) on the end. The Metric value will
always be (1). Then click “Add.”
** You can use Automatic Metric or enter (1)
12. In the case that you need to be able to connect to more than one IP Address, i.e. not all devices on your
network use a 10.X.X.X address; more addresses can be added by repeating steps 10 and 11 above. If you
have another MFC, you may also need to add the IP Address 10.0.0.X, where “X” is a number from 0 to
254 that is unique from any other IP address on your network. The Subnet mask for this IP address is
255.0.0.0, and the typical Default Gateway is 10.0.0.1.
13. Click the “WINS” tab.