Chapter Two: Installation
Product Location and Requirements
9
Product Location and Requirements
Operating Environmental Requirements
•
Ambient Operating Temperature: 0
°
C to 50
°
C (32
°
F to 122
°
F)
•
Ventilation requirements include sufficient air circulation
Caution
The control valve in the 1152 Mass Flow Controller is not a positive
shutoff valve. Depending upon your application, you may need to
install a separate positive shutoff valve.
Setup
The 1152 MFC is bag packaged in a clean room environment. Keep the unit bagged prior to
installation. The 1152 MFC is supplied with Cajon 8-VCR type male fittings. It is important to
protect the fitting seal surfaces since damaged seal surfaces may leak. Always follow the
manufacturer’s recommended installation instructions.
Dimensions
Note
All dimensions are listed in inches with millimeters referenced in
parentheses.
2.62
(66.5)
3.12
(79.2)
0.25 (6.35) Wide Slots
9.50 (241)
0.35 (8.9)
0.25
(6.35)
8.75 (222)
10.25 (260)
ZERO GAIN
Figure 3: Top View of the 1152 Unit
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
