Safety Procedures and Precautions
2
CHECK FOR LEAK-TIGHT FITTINGS
Before proceeding to instrument setup, carefully check all plumbing connections to the
instrument to ensure leak-tight installation.
ENSURE THAT MATERIAL IS COMPATIBLE WITH THE SEAL MATERIAL
It is the user’s responsibility to ensure that the material used is compatible with the seal material
in the instrument
PRODUCT LABELS
The labels on the instrument must not be removed! If labels are missing or illegible, contact
MKS Service department for replacement. . Figure 4, page 10, shows the Warning label.
Definitions of WARNING, CAUTION, and NOTE messages used throughout the manual.
Warning
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, condition, or the like, which, if not
correctly performed or adhered to, could result in injury to
personnel.
Caution
The CAUTION sign denotes a hazard. It calls attention to an
operating procedure, practice, or the like, which, if not correctly
performed or adhered to, could result in damage to or destruction of
all or part of the product.
Note
The NOTE sign denotes important information. It calls attention to a
procedure, practice, condition, or the like, which is essential to highlight.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
