MKN HansDampf 10.1, Service Manual

Page: 34 / 72

Service manual
bdS
button and display test
With this step the button with the according LED´s, knobs and displays are tested.
Button Function Display
Start the test
Back to the configuration menu
The test is started with START/STOP. Alle LED`S are lit, the buttons function is deactivated.

and all decimal point (dots) are displayed. The functions of the buttons are deactivated.
Test of the knobs and displays:
By turning the knob the values change in the display.
By turning the knob to the left
→
the value is decreased.
By turning the knob to the right
→
the value is increased
Button and LED test
By pressing the button the corresponding LED´s are switched off.
If all buttons have been pressed the step is marked as „done“.
In the upper display

. is shown with a dot behind
S
. Indication the procedure has been done.
Now the buttons have there original function. The step can be done again by pressing the
START/STOP button.
If one button is not operated, the test can be finalised by pressing the Start/Stop Button for at least 3
seconds.
34
bdS
---
bdS .