Service manual
Gas technology
Basics of the gas technology
Operation of the gas burner:
The electronic (pcb) gives a heat demand (relay K14 and K15)
to
the burner control.
The electronic (pcb) regulates the speed of the gas fan and supervises these.
The complete igniting process is
handled
by the burner control.
At a failure of the flame signal from the burner control to the electronic the appliance is
nevertheless ready for use. There is an electrical failure of the signal which safety-related is
quite safe as long as no alarm is reported. (The
burner control
has recognized the flame (In this
case there is "just"an error to
transmit information to the electronic The burner control itself
has already detected the flame
).
Functional diagram
13
Summary of Contents for HansDampf 10.1
