MKN HansDampf 10.1, Service Manual

Page: 30 / 72

Service manual
The main menu (Password overview & Diagnosis memory)
Switch unit on.
Push FLEXI button. Push START/
STOP button to enter the selected step.
30
CL
CLE
Half automatic cleaning program with pre setted steps. Manual cleaning
starts when the cabinet temperature has reached 50 °C. If the temperature is
above or below 50 °C, the cabinet is cooled or heated until it has
reached a temperature of 50 °C. Jobs to do when shown on the display:
spray in cleaner, rinse cabinet. This program is only available if the unit is
not equipped with the option WaveClean!
Full automatic cleaning program. Only available at units with option
WaveClean! Three different programs can be selected
(Time duration approx. 1,2 or 3 hours):
Push START/STOP button to start selected program.
CL2 CL3
Password for basic settings:
111
Password for service menu:
777
Enter password with the lower knob and
confirm with START/STOP button.
If the password for the basic settings area got lost, the area can be entered
by pushing the “Combisteam” and “Preheat” button at the same time.
In the diagnosis memory all existing and previous error messages can be
considered. The errors are listed historically. Turn the upper knob to scroll
into diagnosis memory.
CL1
par
dia