manualshive.com logo in svg

Mitsubishi A1SD51S, Programming Manual

The Mitsubishi A1SD51S Programming Manual is a comprehensive guide to utilizing this advanced controller. Users can easily download the manual for free from manualshive.com to enhance their understanding and optimize the performance of this high-quality product. Master the features and capabilities of the A1SD51S with this essential manual.

Share
Download
background image

A - 10                                                                                                                                                  A - 10

PCWT - Processing Code 533 - (Writing data to the buffer memory of the intelligent functional

module of the Q/QnA series PLC CPU) ................................................................................ 11-335

PRINT (Displays data on the screen) ........................................................................................................ 11-344

PRINT USING (Displays a character string or numeric value in the specified format)............................ 11-345

PRINT# (Writes data to a sequential file) .................................................................................................. 11-349

PRINT# USING (Writes data to a sequential file in the specified format) ................................................ 11-350

PUT (Writes one record from a random file buffer to a random file) ........................................................ 11-351

PUTMEM (Writes data to buffer memory, common memory, or internal device ED).............................. 11-352

RDSET (Reads one bit data from the specified bit) .................................................................................. 11-357

READ (Reads a value defined by the DATA instruction and assigns it to a variable)............................. 11-359

REM (Provides comments)........................................................................................................................ 11-360

RENUM (Reassigns line numbers of a program) ..................................................................................... 11-361

RESTORE (Specifies a data read with READ instruction) ....................................................................... 11-362

RESUME (Execution of the error handling routine is completed) ............................................................ 11-363

RIGHT$ (Extracts a character string consisting of the specified number of characters from

the right end of a character string and assigns it to a variable) ............................................ 11-364

RND (Generates random numbers) .......................................................................................................... 11-365

ROT (Returns the bit-rotated value of the integer value data).................................................................. 11-366

RSET (Moves data from memory to a random file buffer and stores right-justified)................................ 11-368

RUN (1) (Starts the execution of the program) ......................................................................................... 11-369

RUN (2) (Executes after loading a program)............................................................................................. 11-370

SAVE (Saves a program) .......................................................................................................................... 11-371

SEARCH (Searches for the specified value among the elements of the selected array

variable and returns the position of the element) .................................................................. 11-372

SGN (Returns the sign of a value)............................................................................................................. 11-374

SHA (Returns the arithmetically shifted value of the integer data)........................................................... 11-375

SHT (Returns the logically shifted value of the integer data) ................................................................... 11-377

SIN (Returns the sine)................................................................................................................................ 11-379

SPACE$ (Returns a null string of a specified length) ............................................................................... 11-380

SPC (Returns a specified number of blank spaces) ................................................................................. 11-381

SQR (Returns the square root of the specified value) .............................................................................. 11-382

STOP (Pauses the program execution or puts it in the stop status) ........................................................ 11-383

STR$ (Converts a value to a character string, assuming the value is given as a decimal number)....... 11-384

STRING$ (Returns the specified character for the specified number of times)....................................... 11-386

SYSTEM (Returns to system mode or the main menu screen) ............................................................... 11-388

SWAP (Swaps the values of two variables) .............................................................................................. 11-389

TAB (Moves the current character display position to the specified position) ......................................... 11-390

TAN (Returns the tangent)......................................................................................................................... 11-391

TIME$ (Sets the time of the PLC CPU's clock and reads) ....................................................................... 11-392

TROFF (Resets the trace in a program).................................................................................................... 11-394

TRON (Starts a trace in a program) .......................................................................................................... 11-395

VAL (Returns the value represented by a character string) ..................................................................... 11-396

W@ (Reads or writes word information) ................................................................................................... 11-398

WHILE WEND (These instructions are used repeatedly, while the specified condition holds)............... 11-400

WIDTH (Sets the width of data to be output to the printer)....................................................................... 11-402

WTSET (Writes 0 or 1 to the specified bit) ................................................................................................ 11-403

Summary of Contents for A1SD51S

















































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for A1SD51S

Data I/O PSV5000 Operator'S Manual preview
PSV5000
Brand: Data I/O Pages: 88
Data Aire dap4 touch Protocol Manual preview
dap4 touch
Brand: Data Aire Pages: 13
Yngri YORK Manual preview
YORK
Brand: Yngri Pages: 20
Saluki SMR Series Quick Start Manual preview
SMR Series
Brand: Saluki Pages: 13
WAGNER PV 100 Translation Of The Original Operating Manual preview
PV 100
Brand: WAGNER Pages: 60
Eaton EZD Series User Manual preview
EZD Series
Brand: Eaton Pages: 448
Eaton EC4E-221-6D4T1 Hardware And Engineering preview
EC4E-221-6D4T1
Brand: Eaton Pages: 57
Osram OT EASY 32 CC Fitting Instructions preview
OT EASY 32 CC
Brand: Osram Pages: 3
Apricus Sentinel S4 Mounting, Connection, Operation preview
Sentinel S4
Brand: Apricus Pages: 32
Analog Devices Linear Technology ADI Power DC3017A Demo Manual preview
Linear Technology ADI Power DC3017A
Brand: Analog Devices Pages: 12
Rain Bird IQ-NCC Installation And User Manual preview
IQ-NCC
Brand: Rain Bird Pages: 48
Sullair 02250160-842 Instruction Manual preview
02250160-842
Brand: Sullair Pages: 31
BABYTREND Expedition Double Jogger Instruction Manual preview
Expedition Double Jogger
Brand: BABYTREND Pages: 18
ETNA Hydropan-Single Operation And Maintenance Manual preview
Hydropan-Single
Brand: ETNA Pages: 12
Danfoss VLT MCD 201 Installation Manual preview
VLT MCD 201
Brand: Danfoss Pages: 36
Ascon tecnologic vP4 Installation Manual preview
vP4
Brand: Ascon tecnologic Pages: 4
CP Electronics AR-SG-4SM-W Product Manual preview
AR-SG-4SM-W
Brand: CP Electronics Pages: 12
Oomlout ARDX Experimenter'S Manual preview
ARDX
Brand: Oomlout Pages: 32

Brands by name

Popular brands

Load more brands