Mitsubishi Heavy Industries FDCW60VNX-W, Installation Manual

Page: 68 / 92

66
Service
choose another file
update firmware 7.1
Select “choose another file" if you do not want to use the
suggested software. When you scroll through the files,
information about the marked software is shown in a fact box
just as before. When you have selected a file with the OK
button you will return to the previous page (menu 7.1) where
you can choose to start the update.
Menu 7.2 - logging
logging 7.2
activated
interval sec
5
Setting range: 1 s – 60 min
Factory setting range: 5 s
You can set the interval of the log data storage and start saving
the log data on the USB memory.
1. Set the desired interval between loggings.
2. Tick “activated".
3.
7KHSUHVHQWYDOXHVIURP5&+<DUHVDYHGLQD¿OHLQ
the USB memory at the set interval until “activated" is
unticked.
NOTE
Untick "activated" before removing the USB memory.
Menu 7.3 - manage settings
Menu 7.3 - manage settings
manage settings 7.3
save settings
recover settings
Here you can manage (save as or retrieve from) all the menu
settings (user and service menus) in RC-HY20/40 with a USB
memory.
Via "save settings" you save the menu settings to the USB
memory in order to restore them later or to copy the settings to
another RC-HY20/40.
NOTE
When you save the menu settings to the USB memory you
replace any previously saved settings
on the USB memory.
Via "recover settings" you reset all menu settings from the
USB memory.
NOTE
Reset of the menu settings from the USB memory cannot be
undone.