Mitsubishi Heavy Industries FDCW60VNX-W, Installation Manual

Page: 67 / 92

65
Service
Menu 7.1 - update firmware
update firmware 7.1
start updating
choose another file
This allows you to update the software in RC-HY20/40.
NOTE
For the following functions to work the USB memory must
contain files with software for RC-HY20/40.
This information states which product the software is intended
for, the software version and general information about them.
If you wish to select another file than the one selected, the
FRUUHFW¿OHFDQEHVHOHFWHGE\FKRRVHDQRWKHU¿OH
start updating
Select “start updating" if you want to start the update.
You are asked whether you really want to update the software.
Respond "yes" to continue or "no" to undo.
If you responded"yes" to the previous question the update
starts and you can now follow the progress of the update on the
display. When the update is complete RC-HY20/40 restarts.
NOTE
A software update does not reset the menu settings in
RC-HY20/40.
NOTE
If the update is interrupted before it is complete (for
example power cut etc.) the software can be reset to the
previous version if the OK button is kept pressing during
start up until the green lamp starts to illuminate (takes
about 10 seconds).
USB service outlet
RC-HY20/40 is equipped with a USB socket in the display
unit. This USB socket can be used to connect a USB memory
to update the software, save logged information and handle the
settings in RC-HY20/40.
update firmware
USB 7
logging
manage settings
When a USB memory is connected a new menu (menu 7)
appears in the display.