Mitsubishi Heavy Industries FDCW60VNX-W, Installation Manual

Page: 52 / 92

50
Commissioning and adjusting
SG Ready
This function can only be used in mains networks that support
the "SG Ready"-standard .
Make settings for the function "SG Ready" here.
Low price mode means that the electricity supplier has a low
WDUL൵DQGWKHV\VWHPXVHVWKLVWRUHGXFHFRVWV
2YHUFDSDFLW\PRGHPHDQVWKDWWKHHOHFWULFLW\VXSSOLHUKDVVHW
WKHWDUL൵YHU\ORZDQGWKHV\VWHPXVHVWKLVWRUHGXFHWKHFRVWV
as much as possible.
affect room temperature
Here you set whether room temperature should be affected
when activating "SG Ready".
:LWKORZSULFHPRGHRI6*5HDG\WKHSDUDOOHOR൵VHWRIWKH
indoor temperature is increased by "+1". If a room sensor is
installed and activated, the desired room temperature increases
by 1 °C.
:LWKRYHUFDSDFLW\PRGHRI6*5HDG\WKHSDUDOOHOR൵VHWIRU
the indoor temperature is increased by"+2".
If a room sensor is installed and activated, the desired room
temperature increases by 2 °C.
affect hot water
Here you set whether the temperature of the hot water should
EHD൵HFWHGZKHQDFWLYDWLQJ6*5HDG\
With low price mode on "SG Ready" the stop temperature of
the hot water is set as high as possible at only compressor
operation (immersion heater not permitted).
With over capacity mode of "SG Ready" the hot water is set to
"luxury" (immersion heater permitted).
affect cooling (accessory required)
Here you set whether room temperature during cooling
RSHUDWLRQVKRXOGEHD൵HFWHGZKHQDFWLYDWLQJ6*5HDG\
With low price mode of "SG Ready" and cooling operation the
LQGRRUWHPSHUDWXUHLVQRWD൵HFWHG
With over capacity mode of "SG Ready" and cooling operation
WKHSDUDOOHOR൵VHWIRUWKHLQGRRUWHPSHUDWXUHLVUHGXFHGE\
If a room sensor is installed and activated, the desired room
temperature decreases by 1 °C.
NOTE
The function must be connected to two AUX inputs and
activated in menu 5.4.