Mitsubishi Electric UM 10t, Instruction Manual

Page: 24 / 60

－
20
－
Examples of basic settings
(1) Follow the procedure shown below to increase the lifting low-speed (to increase the
frequency):
Power-on
Press this button several times, or
press and hold down this button for
several seconds to change the set
frequency (speed) value.
(2) Follow the procedure shown below to set the current hook position as the upper-limit stop
point:
Power-on
Press this button
several times to display
ALP on the segment
indicator (to enable the
limit switches).
Press these two
buttons at the
same time (to
store the current
position).
Press this
button several
times to display
LoC1 on the
segment indicator.
(3) Follow the procedure shown below to raise all the limit positions by 100 mm:
Power-on
Press this button
several times, or
press and hold down
this button for several
seconds to set the
positional raise value.
Press this
button several
times to display
ALP on the
segment indicator.
(4) Follow the procedure shown below to activate the overload stoppage function at the load of
2t for the hoist of 2.8t class (to lower the overload judgment level):
Power-on
Press this button
several times.
Low-speed lifting
operation
Press this button
several times to
display oL-L on
the segment
indicator.
Reduce the
judgment
value. Press this button several
times to display oL on
the segment indicator.
Repeat these steps until the overload stoppage
function can be activated.
Follow the same procedure to
change the judgment level for
high-speed lifting operation.
The actual
load is
needed.
Power-on
This represents the operation to be performed,
such as turning on the power and lifting/lowering
operation.
The value represents the value indicated on the
segment indicator of the CPU board.
On the CPU board, press this button once.
The characters shown on the button represents the
type of the button.
On the CPU board, press this button several times,
or press and hold down this button for several
seconds.
The characters shown on the button represents the
type of the button.