manualshive.com logo in svg

Mitsubishi Electric PURY-WP-YJM-A, Data Book, Page: 215 / 220

Share
Download
Mitsubishi Electric PURY-WP-YJM-A Data Book Download Page 215

5. Test run

SYSTEM DESIGN

4 - 44

System

5-3. Instructions for the water pump replacement

Top panel

Control box

Maintenance panel

Outlet side

Inlet side

Remove the clip.

Nipple (and O-ring) on the connection 

Remove foreign objects with a waste cloth, if any.

O-ring

1.After turning off the power to the HBC controller, replace the water pump. To stop the water flow from the indoor 

unit, perform the following DIPSW operations.
When replacing the water pump near the water supply port, set DIPSW4-6 to ON (DIPSW4-7 to OFF).
When replacing the other water pump, set DIPSW4-6 and DIPSW4-7 to ON.

2.Open the top panel and maintenance panel of the water pump to be replaced.

   When inserting the water pump, lubricate the O-ring with soapy water.

3.Remove the clips on the inlet/outlet of the water pump.

4.Remove the water pump by pulling out the inlet/outlet of the water pump.

5.After removing the water pump, check the O-ring on the sleeve for damage. If O-ring is damaged, replace the 

O-ring with a new one.

6.Insert the water pump again so that debris is not trapped in the O-ring, and install the clip.

7.After closing the panels, turn on the power to the HBC controller, and perform the air vent operation.

Summary of Contents for PURY-WP-YJM-A





























































































































































































































Reviews:

No comments