manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-F FX5UC Series, User Manual

The Mitsubishi Electric MELSEC iQ-F FX5UC Series offers exceptional automation control with its compact design. Unlock the full potential of this advanced hardware by downloading the free hardware manual from our website. Explore its features, functionalities, and programming instructions to maximize efficiency in your industrial operations.

Share
Download
background image

268

APPX
Appendix 2  Standards

Requirements for Low Voltage Directive (LVD) compliance

The following products have shown compliance through direct testing (of the identified standards below) and design analysis 
(through the creation of a technical construction file) to the European Low Voltage Directive (2014/35/EU) when used as 
directed by the appropriate documentation.

■

Product compatibility

Type: Programmable controller (open-type device)

*1 Area-specific model

For the products above, programmable controllers manufactured
before March 31st, 2018 are compliant with EN61131-2:2007.
Programmable controllers manufactured after April 1st, 2018 are compliant with EN61131-2: 2007 and IEC 61010-2-201: 
2018.

*2

*2 For some models, programmable controllers manufactured in March, 2018 are compliant with LVD directive successively.

Caution for compliance with EC Directive

 • Please use the FX5 CPU modules while installed in conductive shielded control panels under a general industrial 

environment.

 • Please use the programmable controller while installed within a conductive shielded control panel. Please secure the 

control box lid to the control box (for conduction). Installation within a control panel greatly affects the safety of the system 
and aids in shielding noise from the programmable controller.

 • For the control panel, use the product having sufficient strength, fire protectiveness and shielding property to an installation 

environment.

 • 24VDC of the power supply must be supplied from the circuit double/reinforced insulated from the main power supply 

(MAINS).

 • For the AC power supply input cable of modules manufactured in or before November 2020 (serial number 20Y****) shown 

below, wind a ferrite core around it once near the module.

 • When not using the peripheral connector during operation, close the peripheral connector cover. In addition, if there is a 

possibility that the built-in Ethernet communication connector may be touched in operation, be sure to eliminate the static 
electricity or attach an Ethernet cap

*1

 to prevent the influence of static electricity.

*1 Reference product: MJ-JP68K manufactured by JST Mfg. Co., Ltd.

from October 1st, 2014

FX5U-32MR/ES, FX5U-32MT/ES, FX5U-32MT/ESS, FX5U-64MR/ES, FX5U-64MT/ES, FX5U-64MT/ESS, FX5U-80MR/
ES, FX5U-80MT/ES, FX5U-80MT/ESS, FX5-8EYR/ES, FX5-16EYR/ES, FX5-32ER/ES, FX5-32ET/ES, FX5-32ET/ESS, 
FX5-1PSU-5V

from May 1st, 2016

FX5U-32MR/DS, FX5-32ER/DS

from October 1st, 2016

FX5U-64MR/DS, FX5U-80MR/DS, FX5-16ER/ES

from January 1st, 2019

FX5UC-32MR/DS-TS, FX5-C16EYR/D-TS

from October 1st, 2019

FX5UJ-24MR/ES FX5UJ-24MT/ES FX5UJ-24MT/ESS, FX5UJ-40MR/ES FX5UJ-40MT/ES FX5UJ-40MT/ESS, FX5UJ-
60MR/ES FX5UJ-60MT/ES FX5UJ-60MT/ESS

from October 1st, 2021

FX5S-30MR/ES, FX5S-30MT/ES, FX5S-30MT/ESS, FX5S-40MR/ES, FX5S-40MT/ES, FX5S-40MT/ESS, FX5S-60MR/
ES, FX5S-60MT/ES, FX5S-60MT/ESS, FX5S-80MR/ES

*1

, FX5S-80MT/ES

*1

, FX5S-80MT/ESS

*1

Compliance with LVD directive

Remarks

EN61131-2:2007 Programmable controllers

• Equipment requirements and tests

The equipment has been assessed as a component for fitting in a suitable 
control box which meets the requirements of EN61131-2:2007.

EN IEC 61010-2-201:2018
Safety of electrical equipment for measurement, control, and test

The equipment has been assessed as a component for fitting in a suitable 
control box which meets the requirements of EN IEC 61010-2-201:2018.

Item

Description

Ferrite core used in tests by Mitsubishi Electric

E04SR401938 (SEIWA ELECTRIC MFG. CO., LTD.)

Target modules

FX5UJ-40MR/ES FX5UJ-40MT/ES FX5UJ-40MT/ESS
FX5UJ-60MR/ES FX5UJ-60MT/ES FX5UJ-60MT/ESS

Summary of Contents for MELSEC iQ-F FX5UC Series



























































































































































































































































































Reviews:

No comments

Related manuals for MELSEC iQ-F FX5UC Series

Federal Signal Corporation FC Description, Specifications, Installation, Operation, And Service Manual preview
FC
Brand: Federal Signal Corporation Pages: 34
Walimex Pro Excellence Instruction Manual preview
Excellence
Brand: Walimex Pro Pages: 68
Harmonic Drive CHA Engineering Data preview
CHA
Brand: Harmonic Drive Pages: 85
National Instruments PXIe-4302 Calibration Procedure preview
PXIe-4302
Brand: National Instruments Pages: 14
National Instruments PXIe-4302 User Manual preview
PXIe-4302
Brand: National Instruments Pages: 31
National Instruments NI-9244 User Manual And Specifications preview
NI-9244
Brand: National Instruments Pages: 50
National Instruments NI 9870 Operating Instructions And Specifications preview
NI 9870
Brand: National Instruments Pages: 24
National Instruments NI 9247 Getting Started Manual preview
NI 9247
Brand: National Instruments Pages: 21
National Instruments NI 9242 Getting Started Manual preview
NI 9242
Brand: National Instruments Pages: 39
National Instruments NI 9218 Getting Started preview
NI 9218
Brand: National Instruments Pages: 22
National Instruments NI 9263 Calibration Procedure preview
NI 9263
Brand: National Instruments Pages: 8
National Instruments NI 9425 Getting Started Manual preview
NI 9425
Brand: National Instruments Pages: 20
National Instruments NI 9234 Getting Started preview
NI 9234
Brand: National Instruments Pages: 9
National Instruments FIeldPoint FP-AO-200 Operating Instructions Manual preview
FIeldPoint FP-AO-200
Brand: National Instruments Pages: 13
National Instruments NI 9205 Getting Started Manual preview
NI 9205
Brand: National Instruments Pages: 26
National Instruments FieldPoint FP-1000 Operating Instructions Manual preview
FieldPoint FP-1000
Brand: National Instruments Pages: 12
National Instruments NI 9264 Getting Started Manual preview
NI 9264
Brand: National Instruments Pages: 20
Ziton zp1-f Series Operation Manual preview
zp1-f Series
Brand: Ziton Pages: 28

Brands by name

Popular brands

Load more brands