14 PROCEDURES BEFORE OPERATION
14.6 Connecting a Personal Computer
239
14
14.6
Connecting a Personal Computer
Connect a personal computer that has an engineering tool installed to the CPU module.
When Ethernet cable is used (direct connection)
Connect a personal computer directly to the CPU module, following the procedure below.
GX Works3 settings
For the FX5 CPU module, the Ethernet adapter on the personal computer side used for the Ethernet port
direct connection can be specified.
Select an adapter on the "Connection Destination Simple Setting Connection" window.
1.
Connect a personal computer to the CPU module using
the Ethernet cable.
2.
Select [Online]
[Current Connection Destination] on
the menubar of the engineering tool.
3.
Select [Ethernet] as the direct connection method with
the CPU module on the "Connection Destination Simple
Setting Connection" window.
Click the "Communication Test" button to check if the
connection can be established with the CPU module.
No.
Item
Selection item
Internal setting
Input value
1)
Personal computer side I/F
Ethernet Board
2)
programmable controller
side I/F
CPU module
Ethernet Port Direct Connection
Other Station Setting
No Specification
Check at Communication Time
30 seconds
Retry Times
0 times
Summary of Contents for MELSEC iQ-F FX5UC Series
