manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-F FX5UC Series, User Manual

The Mitsubishi Electric MELSEC iQ-F FX5UC Series offers exceptional automation control with its compact design. Unlock the full potential of this advanced hardware by downloading the free hardware manual from our website. Explore its features, functionalities, and programming instructions to maximize efficiency in your industrial operations.

Share
Download
background image

20

INTRODUCTION

This manual describes the system configuration, specifications, installation, wiring, maintenance, and inspection of MELSEC 
iQ-F series programmable controllers.
Please read this manual and the relevant manuals and fully understand the specifications before attempting to use the 
module.
Also, please ensure that the end users read this manual.

Target modules

*1 Area-specific model

Regarding use of this product

 • This product has been manufactured as a general-purpose part for general industries, and has not been designed or 

manufactured to be incorporated in a device or system used in purposes related to human life.

 • Before using the product for special purposes such as nuclear power, electric power, aerospace, medicine or passenger 

movement vehicles, consult Mitsubishi Electric.

 • This product has been manufactured under strict quality control. However when installing the product where major 

accidents or losses could occur if the product fails, install appropriate backup or failsafe functions in the system.

Note

 • If in doubt at any stage during the installation of the product, always consult a professional electrical engineer who is 

qualified and trained in the local and national standards. If in doubt about the operation or use, please consult the nearest 
Mitsubishi Electric representative.

 • Since the examples indicated by this manual, technical bulletin, catalog, etc. are used as a reference and do not guarantee 

operation, please use the product after confirming for yourself the function and safety of the device and machine.

 • The content, including specifications, in this manual may be changed for improvement without notice.
 • The information in this manual has been carefully checked and is believed to be accurate; however, if you have noticed a 

doubtful point or a doubtful error, please contact your local Mitsubishi Electric representative. When doing so, please 
provide the manual number given at the end of this manual.

Item

Model

FX5S CPU module

FX5S-30MR/ES, FX5S-40MR/ES, FX5S-60MR/ES, FX5S-80MR/ES

*1

, FX5S-30MT/ES, FX5S-40MT/ES, FX5S-60MT/ES, 

FX5S-80MT/ES

*1

, FX5S-30MT/ESS, FX5S-40MT/ESS, FX5S-60MT/ESS, FX5S-80MT/ESS

*1

FX5UJ CPU module

FX5UJ-24MR/ES, FX5UJ-24MT/ES, FX5UJ-24MT/ESS, FX5UJ-40MR/ES, FX5UJ-40MT/ES, FX5UJ-40MT/ESS, FX5UJ-
60MR/ES, FX5UJ-60MT/ES, FX5UJ-60MT/ESS

FX5U CPU module

FX5U-32MR/ES, FX5U-32MT/ES, FX5U-32MT/ESS, FX5U-64MR/ES, FX5U-64MT/ES, FX5U-64MT/ESS, FX5U-80MR/ES, 
FX5U-80MT/ES, FX5U-80MT/ESS, FX5U-32MR/DS, FX5U-32MT/DS, FX5U-32MT/DSS, FX5U-64MR/DS, FX5U-64MT/DS, 
FX5U-64MT/DSS, FX5U-80MR/DS, FX5U-80MT/DS, FX5U-80MT/DSS

FX5UC CPU module

FX5UC-32MT/D, FX5UC-32MT/DSS, FX5UC-32MT/DS-TS, FX5UC-32MT/DSS-TS, FX5UC-32MR/DS-TS, FX5UC-64MT/D, 
FX5UC-64MT/DSS, FX5UC-96MT/D, FX5UC-96MT/DSS

Input module

FX5-8EX/ES, FX5-16EX/ES, FX5-C16EX/D, FX5-C16EX/DS, FX5-C32EX/D, FX5-C32EX/DS, FX5-C32EX/DS-TS

Output module

FX5-8EYR/ES, FX5-8EYT/ES, FX5-8EYT/ESS, FX5-16EYR/ES, FX5-16EYT/ES, FX5-16EYT/ESS, FX5-C16EYR/D-TS, FX5-
C16EYT/D, FX5-C16EYT/DSS, FX5-C32EYT/D, FX5-C32EYT/DSS, FX5-C32EYT/DSS-TS, FX5-C32EYT/D-TS

I/O module

FX5-16ER/ES, FX5-16ET/ES, FX5-16ET/ESS, FX5-C32ET/D, FX5-C32ET/DSS, FX5-C32ET/DS-TS, FX5-C32ET/DSS-TS

Powered input/output module

FX5-32ER/ES, FX5-32ET/ES, FX5-32ET/ESS, FX5-32ER/DS, FX5-32ET/DS, FX5-32ET/DSS

High-speed pulse input/
output module

FX5-16ET/ES-H, FX5-16ET/ESS-H

Extension power supply 
module

FX5-1PSU-5V, FX5-C1PS-5V

Connector conversion 
module

FX5-CNV-IF, FX5-CNV-IFC

Summary of Contents for MELSEC iQ-F FX5UC Series



























































































































































































































































































Reviews:

No comments

Related manuals for MELSEC iQ-F FX5UC Series

Jafar 3500 Operating Manual preview
3500
Brand: Jafar Pages: 9
Samsung SPC-6000 Quick Setup Manual preview
SPC-6000
Brand: Samsung Pages: 6
Samsung MWR-WE10N Manual preview
MWR-WE10N
Brand: Samsung Pages: 32
Lawler 911 Installation & Maintenance Manual preview
911
Brand: Lawler Pages: 6
Data Aire dap4 touch Supplement Manual preview
dap4 touch
Brand: Data Aire Pages: 28
Abocom AM7221 User Manual preview
AM7221
Brand: Abocom Pages: 10
Jolly Universal Family for Sony Instructions Manual preview
Universal Family for Sony
Brand: Jolly Pages: 68
Galil Motion Control DMC-40x0 Series Command Reference Manual preview
DMC-40x0 Series
Brand: Galil Motion Control Pages: 280
OLYS MPPT5010 User Manual preview
MPPT5010
Brand: OLYS Pages: 4
Watersports Innovations The Boost Box WS 1107 Installation & Operation Instructions preview
The Boost Box WS 1107
Brand: Watersports Innovations Pages: 12
Parker IQAN-XS2 Instruction Book preview
IQAN-XS2
Brand: Parker Pages: 31
Pixie PXE-DCM Installation Manual preview
PXE-DCM
Brand: Pixie Pages: 21
Grundfos EC 15 Installation And Operating Instructions Manual preview
EC 15
Brand: Grundfos Pages: 80
YOKOGAWA Revolution FA-M3 R Technical Information preview
Revolution FA-M3 R
Brand: YOKOGAWA Pages: 57
Greenheck 474706 Reference Manual preview
474706
Brand: Greenheck Pages: 32
Washify MOXA Installing preview
MOXA
Brand: Washify Pages: 25
Allen-Bradley ControlLogix 1756-OX8I Installation Instructions Manual preview
ControlLogix 1756-OX8I
Brand: Allen-Bradley Pages: 20
microHAM micro2R User Manual preview
micro2R
Brand: microHAM Pages: 64

Brands by name

Popular brands

Load more brands