Mitsubishi Electric M720 User Manual Download Page 82

Page: 82 / 87

Appendix

Menu limit reached

A new service menu item has been received but the remaining storage

space is not sufficient to store it. Delete one or more registered menu

items (My Services menu) and accept the new menu or discard the new

menu.

Message not sent

The handset may be out of the network range or the network is

temporarily overloaded.

Network busy

You tried to make a call. The call is rejected by the network due to

congestion problems.

Network not allowed

When selecting network manual search, you have selected a network

that rejects the connection.

New PIN2

incorrect. Try again

Changing PIN2: the new PIN2 code values differ (value control).

New PIN

incorrect. Try again

Changing PIN: the new PIN code values differ (value control).

No response

You made a call to a remote user and no response has been received.

Not allowed

Your number/character entry is not allowed.

Not allowed fixed dialling)

A call is tried, but cancelled due to fixed dialling control (the number

dialled does not match with one of the fixed dialling numbers in

memory).

Number changed

The called number has changed.

Page has no content

Your request was accepted by the network but the required server page

is empty.

PIN blocked

A wrong PIN code has been entered 3 times.

PIN2 blocked

A wrong PIN2 code has been entered 3 times.

PUK2 blocked

A wrong PUK2 code has been entered 10 times.

The SIM services protected by the PIN2 code have now been

permanently disabled.

Reaching allowed credit!

The cost limit is about to be reached. The connected call ends

automatically when the limit is reached.

Registration required

You have not registered to any service. Go to the Service registration

menu.

Ring volume Off

The ring volume is set to 0 (no volume)

Server limit reached

A new service has been received but the remaining storage space is not

sufficient to store it. Delete one or more registered service(s) - Settings

menu - and accept the new service or discard the new service.

Service not available

Activating some GSM services that are not available on the network

SIM blocked. Contact

provider

A wrong PUK has been entered 10 times.

The SIM card has been permanently disabled and needs to be replaced

by a new one.

SIM blocked. Enter PUK:

A wrong PIN code has been entered 3 times.

Enter the PUK code to unblock the SIM card.

SIM fixed full

SIM names full

Phone names full

The corresponding memory is full.

Wrong code. Try again

A wrong phone lock code has been entered.

Wrong new code. Try again

The new phone lock codes do not match (value control).

Wrong PIN, try again

Wrong PIN2, try again

Wrong PUK, try again

Wrong PUK2, try again

The wrong code has been entered.

Summary of Contents for M720
























































































Search results

Summary of Contents for M720

Reviews:

Related manuals for M720

Brands by name

Popular brands

Mitsubishi Electric M720, User Manual

Search results

Summary of Contents for M720

Reviews:

Related manuals for M720

Brands by name

Popular brands