3
4
-
Multimedia Messages
COPY
TO
Please see the ’To’ section above.
NAME
CARD
The name card field allows to attach a copy of a vcard to the multimedia message.
PREPARING
THE
PHONE
TO
SEND
MMS
MESSAGES
The Multimedia Message service is subscription and network dependent. The operator profile
details may already be stored on your mobile. If not, please contact your service provider to get
them.
The profile list can contain up to 3 MMS profiles. A profile is a list of parameters that allow MMS
connections via a specific gateway.
TO
ENTER
AND
STORE
THE
PROFILE
DETAILS
You can only register profile details if you have previously registered profiles in the Connection
manager menu (see "connection manager", page 7
1
):
SETTING
MULTIMEDIA
MESSAGES
CHARACTERISTICS
Before sending a message
,
you can determine whether or not to receive a delivery
report,
a read reply report (to confirm your message and its contents were read by the address
ee)
and to set a priority degree (high, normal or low) to your message.
1
Select the
Name card
list
2
Select a name in the phonebook. A copy of the vcard is then attached to the message
If there is already an attached vcard, pressing OK displays the Modify and Delete options.
1
Press
OK
.
Select
Messages
.
2
Select
Multimedia messages
.
3
Select
Settings
.
4
Select
MMS profiles
.
5
Choose an empty profile (
[...]
) and press
OK
.
6
Enter the profile name and press
OK
.
7
Select
Message centre
. Select
List
to select one of the available home page addresses or
the http:// and https:// root address, or type in the URL address. Press
OK
.
8
Select
Connection profiles
. Enter the requested information (the GSM connection and
GPRS connection fields are linked to the Connection manager and thus allow to pick one
from the displayed list - see "connection manager", page 7
1
). Select
Save
to store the data.
9
Select
Gateway settings
and type in the IP address.
The sending and receiving of MMS is now possible.
10
Select
Advanced settings
and fill in the required fields.
1.All the requested parameters
can be
obtain
ed
from your network operator and/or Wap™ provider.
2. The phone number or access point name, the login and the password are to be stored in the Connection
Manager (see Table , page 7
1
).
3. Access to the content of the MMS profile may depend on the pre-programm
ing
of the settings. The connection
settings menu may not be available in some cases. These settings may be 'Locked' (operator dependent) and not
be programmable
by the user
.
4. Your service provider may require to have the security context reset. Select Yes.
5. For more information on the Advanced settings please refer to "advanced settings on wap™ profiles", page 6
4
.
6. The Validity period for a MMS is the maximum time the message is available on the network before it can
be retrieved by the addressee. The validity period is set to Maximum by default. This feature is present in the
Advanced settings (
page 6
4
).
1
Press
OK
.
Select
Messages
.
2
Select
Multimedia messages
.
3
Select
Settings
.
4
Select
Message config.
5
Enter the required information and select
Save
to store your settings.
The availability of this menu and of its contents is operator dependent.
Summary of Contents for M720
Page 86: ......
Page 87: ...MQ860C005A01 ...
