Mitsubishi Electric M720 User Manual Download Page 81

Page: 81 / 87

Appendix

ERROR

MESSAGES

PROBLEM

POSSIBLE

CAUSE

AND

SOLUTION

Allowed credit reached!

You are trying to place an outgoing call and the allowed credit is already

reached.

The allowed credit limit is reached during an outgoing call (the call is

then aborted).

Busy

You are trying to make a call and the call fails because the destination

number is already engaged in conversation.

Call failed

The user is unreachable.

The outgoing call fails due to:

the network cannot take the call due to system busy or

the number is out of order or

the number is unreachable or

the network does not answer or

the option to hide your phone number when calling is not supported by

the network

Control the ability to hide your ID when making a call (service availability

in network).

Cancelled. No type

selected

Cell broadcast activation has been requested but no message type has

been selected.

Cannot execute command

You have made a request which is impossible to be executed in the

current call situation.

Can't display message

The short message text cannot be displayed (characters not

recognised, incorrect format etc.)

Check SIM!

There is no SIM present or the SIM is incorrectly inserted.

Check your password

You changed the call barring password or

You changed the call barring service status.

The entered password seems to be wrong or incorrect.

Check your request

You made a request for a service that seems to be impossible to fulfil.

Check your subscription

You tried to activate a GSM service. You are requested to check your

subscription regarding the related service rights of use/access.

Connection failed

Connection with the server cannot be established for one of the

following reasons:

The server is busy. Try to connect later.

The server is down. Try to connect later.

The network is not reachable. Check the GPRS service icon is

displayed on standby mode.

Error!

The network cannot perform your request and generates an error result.

Failed

An SMS sending process failed (the short message cannot be sent).

File too big

The file dimensions (pixels) and/or weight (kB) are not adapted to your

mobile. Resize the file (The maximum allowed file size depends on your

service provider).

File protected

The file cannot be exported (copyright).

Incorrect entry

You entered a character string with a syntax error.

Internal fault

An unrecoverable error has occurred. Switch the handset off and back

on again.

Invalid data received

The received file bears invalid information or the melody format cannot

be recognised by the mobile

Invalid number

- You tried to make a call and the call is rejected by the network because

the network does not recognise the phone number structure or you tried

to store a phone number that is too long to be stored in the selected

location or

- you tried to move a phone entry to a location that is unable to receive

the phone number (phone number too long).

Invalid Service Menu

An invalid service menu has been sent to the handset. The invalid

service menu is ignored, no further action necessary.

Summary of Contents for M720
























































































Search results

Summary of Contents for M720

Reviews:

Related manuals for M720

Brands by name

Popular brands

Mitsubishi Electric M720, User Manual

Search results

Summary of Contents for M720

Reviews:

Related manuals for M720

Brands by name

Popular brands