6
6
6.2
<A>
<B>
XL-module
[Fig. 6.2.1]
<A> Remove the front panel from the unit by unscrewing the 14 screws.
<B> Remove the fan guard by unscrewing the 12 screws.
* Remove the snow protection hood (optional parts), if any.
A
<A>
[Fig. 6.2.2]
<A> Remove the control box front cover by unscrewing the five screws.
A
Control box front cover
A
A
A
B
*
C
D
<B>
<A>
<C>
[Fig. 6.2.3]
<A> Remove the external temperature sensor wiring from the left
drain pan by cutting the two cable ties.
<B> Unhook the pipe cover from the left drain pan.
<C> Remove the left drain pan by unscrewing the two screws.
A
Left drain pan
B
External temperature sensor wiring
C
Cable tie
D
Pipe cover
* When re-placing
B
to the left drain pan after installing the panel
heater, use the supplied cable tie (100 mm).
WT08867X01.book 6 ページ ２０１８年１月２２日 月曜日 午後３時１７分
