3
6
6.0
B
A
[Fig. 6.0.5]
Cut the three cable ties and loosen the two cable straps holding the weak electrical
wiring outside the main control box.
A
Cable tie
B
Cable strap
B
A
<A>
<B>
[Fig. 6.0.6]
<A> Loosen the three cable straps holding the motor wiring outside and the bottom of
the main control box.
<B> Remove the wiring from the two wire saddles.
A
Cable strap
B
Wire saddle
A
<A>
[Fig. 6.0.7]
<A> Loosen the two cable straps holding the strong electrical wiring outside and the
bottom of the main control box.
A
Cable strap
B
A
<A>
[Fig. 6.0.8]
<A> Cut the cable tie and loosen the two welding clamps holding the strong
electrical wiring at the bottom of the main control box.
A
Cable tie
B
Welding clamp
<A>
[Fig. 6.0.9]
<A> Unscrew the two screws holding the main control box.
WT08867X01.book 3 ページ ２０１８年１月２２日 月曜日 午後３時１７分
