11
8
8.1.0
<A>
B
A
[Fig. 8.1.0.4]
<A> Screw down the metal sheet wiring cover at three points.
A
Cover wiring 1
B
Cover wiring 3
<A>
<B>
A
A
A
B
C
D
*
E
[Fig. 8.1.0.5]
<A> Pull up the panel heater wirings so that the wirings run along the right rear pillar.
<B> Thread the wiring through the hole on the right rear pillar and bring it into the inner
side of the heat exchanger.
A
Panel heater wiring
B
Right rear pillar
C
Right frame
D
Heat exchanger fixing plate
E
Wire seal
* If the wiring comes in contact with the edges of the heat exchanger fixing plate, place
the supplied wire seal.
Rear side
<A>
B
A
[Fig. 8.1.0.6]
<A> Screw down the metal sheet wiring cover at three points.
A
Cover wiring 1
B
Cover wiring 2
WT08867X01.book 11 ページ ２０１８年１月２２日 月曜日 午後３時１７分
