manualshive.com logo in svg

Mitsubishi Electric AE-200A, Instruction Book

Share
Download
Mitsubishi Electric AE-200A Instruction Book Download Page 36

36

WT07996X02

2-1-4. Selecting the icons of the groups to be operated

In the screens under the [Monitor/Operation] menu, select the icon(s) of the group(s) to be operated as explained 

below.

[1]  Selecting group icons

(1) Selecting unit group(s)

(1)  In the Floor Layout screen or group list, click the icon(s) of the group(s) you want to operate. 

The selected group icon(s) will appear with a checkmark and a dark blue frame.

Click again to deselect.

To cancel all group selections, click [Deselect all] or [Close] in the taskbar.

(2) Selecting all unit groups on the selected floor

(1)  Select the floor for which you wish to perform operation by making a selection in “Displayed floor switching 

area” and then “Floor display area” on the Home (Preview) screen, and then click [Select all] on the [Floor 

Layout] screen.

All icon(s) on the selected floor will appear with a checkmark and a dark blue frame.

To cancel all group selections, click [Deselect all] or [Close] in the taskbar.

 

Floor Layout

Deselect 

all

Group 

selection

Close

Group 

selection

Deselect all

Close

Group list

Home (Preview)

Deselect 

all

①

Displayed floor 

switching area

Select the unit of floors 

that includes the floor for 

which you wish to perform 

operation.

Close

Floor Layout

②

Floor display area

Select the floor for which 

you wish to perform 

operation.

Select all

Summary of Contents for AE-200A

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands