101
WT07996X02
Item
Description
Energy management
data
[Data type: 1-day intervals]
Row
Item
Format
1st
File Type
503
2nd
Data range
Start date + “–” + End date
3rd
Item
*1*2
“Date,Data1(51),...Data1(100),Data3(51),...Data3(100),
OutdoorTemp(51),...OutdoorTemp(100),CoolSetTemp(1),...CoolSetTemp(50),
HeatSetTemp(1),...HeatSetTemp(50),RoomTemp(1),...RoomTemp(50),
FanTime(1),...FanTime(50),CoolTime(1),...CoolTime(50),
HeatTime(1),...HeatTime(50),ThermoTime(1),...ThermoTime(50),
CoolThermoTime(1),...CoolThermoTime(50),
HeatThermoTime(1),...HeatThermoTime(50),
SaveValue(1),...SaveValue(50),CoolSaveValue(1),...CoolSaveValue(50),
HeatSaveValue(1),...HeatSaveValue(50),
ApporionedElectricEnergy(1),...ApporionedElectricEnergy(50),
TargetElectricEnergy(1),...TargetElectricEnergy(50),
MCP1(0),...MCP1(50),MCP2(0),...MCP2(50),MCP3(0),...MCP3(50),
MCP4(0),...MCP4(50),MCT1(1),...MCT1(50),MCT2(1),...MCT2(50),
AHC1(201),...AHC1(250),AHC2(201),...AHC2(250),
MCP1,MCP2,MCP3,MCP4
*3
”
4th
Measurement
unit
Item
Unit
ApportionedElectricEnergy, TargetElectricEnergy
kWh
Data1, Data3
-
OutdoorTemp, CoolSetTemp, HeatSetTemp,
RoomTemp
ºC, ºF
FanTime, CoolTime, HeatTime, ThermoTime,
CoolThermoTime, HeatThermoTime, SaveValue,
CoolSaveValue, HeatSaveValue
Minute
MCP (PI controller/Built-in Pulse Input (PI))
kWh, m3, MJ,
Blank
MCT (AI controller)
ºC, ºF, %
AHC (Advanced HVAC CONTROLLER)
ºC, ºF
5th–
779th
Data
*1*2*4*5*6*7
Date, Data 1 (51), ... (100), Data 3 (51), ... (100),
Outdoor temperature (51), ... (100), Cooling set temperature (1), ... (50),
Heating set temperature (1), ... (50), Room temperature (1), ... (50),
Fan operation time (1), ... (50), Cooling operation time (1), ... (50),
Heating operation time (1), ... (50), Thermo-ON time (1), ... (50),
Cooling Thermo-ON time (1), ... (50), Heating Thermo-ON time (1), ... (50),
Capacity-save value (1), ... (50), Cooling capacity-save value (1), ... (50),
Heating capacity-save value (1), ... (50), Apporioned electric energy (1), ... (50),
Target electric energy (1), ... (50), MCP 1 (1), ... (50), MCP 2 (1), ... (50),
MCP 3 (1), ... (50), MCP 4 (1), ... (50), MCT 1 (1), ... (50), MCT 2 (1), ... (50),
AHC temperature 1 (201), ... (250), AHC temperature 2 (201), ... (250), MCP 1,
MCP 2, MCP 3, MCP 4
*1 The numbers shown after “MCP” and “MCT” indicate channel No.
*2 The numbers in the parentheses indicate M-NET addresses.
*3 The measurement value of the built-in Pulse Input (PI) to AE-200/AE-50/EW-50 is only MCP1–
MCP4, and the addresses are not displayed.
*4 “Outdoor temperature,” “Cooling set temperature,” “Heating set temperature,” and “Room
temperature” in the data are the average daily values of the temperature values obtained every hour.
*5 “MCT 1” and “MCT 2” in the data are the average daily temperature or humidity values obtained
every hour.
*6 The value will not appear if the data does not exist.
*7 Each file contains up to 775 data (25-month worth of data).
For building managers
Chapter 2
