manualshive.com logo in svg

Mitsubishi Electric AE-200A, Instruction Book

Share
Download
Mitsubishi Electric AE-200A Instruction Book Download Page 164

164

WT07996X02

[4]  General equipment group

Item

Operation method

Description

ON/OFF

Select [ON] or 

[OFF].

Turns on or off the units.

Operation 

prohibition 

mark

Display only

Operation prohibition mark 

 is displayed when the operation is prohibited from the 

local remote controllers.

Send

Click [Send].

Click to reflect the changes made and return to the group list.

Close

Click [Close].

Click to return to the group list without making any changes.

 

Note:  General equipment whose prohibition setting is enabled (“Allow operations” is set to [No operations] on the group settings screen 

in the initial settings) cannot be operated. Refer to the Instruction Book (Initial Settings) for settings methods.

Send

Click to reflect the changes made.

Close

Click to close the 

settings screen without 

making any changes.

Group name

ON/OFF

Operation prohibition mark 

Summary of Contents for AE-200A

































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands