Mitsubishi Electric AE-200A Instruction Book Download Page 33

Page: 33 / 192

WT07996X02

[4] HWHP (CAHV, CRHV) unit group

Click [Monitor/Operation] in the menu, and then click [HWHP] to display the operation status of HWHP (CAHV,

CRHV) unit groups.

Note: [HWHP] will not appear if no HWHP (CAHV, CRHV) units have been registered to any group.

Note: Fan mode will appear only for CAHV units. Brine temperature will appear only for CRHV units.

The operation mode currently in use is displayed in “Operation mode”.

•

HWHP (CAHV, CRHV) unit group

Heating

Heating ECO

Hot Water

Anti-freeze

Controller

Click to narrow down the

HWHP unit groups to

display.

Select all

Click to select all displayed

unit groups at once.

Deselect all

Click to cancel all selections

at once.

Group icon

Set temperature

Fan mode

Operation mode

Temperatures

Representative water

temperature, outdoor

temperature, brine

temperature, inlet water

temperature, and outlet

water temperature are

displayed.

Group name

For building managers

Chapter 2

Summary of Contents for AE-200A

































































































































































































Search results

Summary of Contents for AE-200A

Reviews:

Brands by name

Popular brands

Mitsubishi Electric AE-200A, Instruction Book

Search results

Summary of Contents for AE-200A

Reviews:

Brands by name

Popular brands