MITS Eleven Auto FPZ-31AT, Command Manual, Page: 77 / 108

76
Fiducial Positioning Camera
It is the useful option for the precision alignment.
Move the camera
onto the reference
hole called P1 and
P2, register P1 and
P2 location and the
program will align the
angle.
Mostly, the registration
pin is not necessary by
using camera option.
However, the right
side 70mm of milling
area is out of range of
view field.
So when milling
large board, the registration pin will be necessary although you have the camera
system.
And this system is not auto-image-process.