MITS Eleven Auto FPZ-31AT, Command Manual, Page: 57 / 108

56
Preparing Tools for Working with Standard FR-4
Since this prototyping is automatic tool change machine, it is necessary to prepare the
following tool bits and insert it to the correct tool post.
Go to Information → Tool List
Check the Tool No. for each layer. Go to CAM Prefs. → Milling
Find the corresponding Tool No. to the tool list and check number in POST.
POST is the number of the tool post on the prototyping machine.
Insert the corresponding milling bit to the correct tool post.
Do the similar procedure for with drill bit and routing bit.
For drill bit, go to CAM Prefs. → Drilling
For routing bit, go to CAM Prefs. → Routing
.