MITS Eleven Auto FPZ-31AT, Command Manual, Page: 36 / 108

35
Concept of Registration Pin
The Concept of the Registration Pin
The registration pin is a reference point for
fabricating double-sided boards. By using the
registration pin, after the milling on top side is
finished, you can simply turn over the board and
place it in to the registration pin to process the
bottom side. With registration pin,
realigning/readjustment is not necessary.
When we think about the board average material size
and the working area of the machine, it is
recommended that we make 2 holes on the plastic
plate in 190mm distance away from each other.
In software, the front location of the registration pin of
the table is called "P3".
Please note that this is one of the recommendations and there may be other suitable
settings of the location of the registration pins depending on your situations.