MITS Eleven Auto FPZ-31AT, Command Manual, Page: 3 / 108

2
Preparing Fabrication P.33
●
Concept of P1P2 Revised P.34
●
Concept of Registration Pin P.35
●
Set Plastic Plates and Underlay P.36
●
Set P3 P.37
●
Drill Holes for Registration Pins P.38
●
Backup P3 Info P.39
●
Set Adjust Method P.40
●
Enter Thickness of the Board P.41
Manual Operation P.42
●
Launch Design Pro P.43
●
Manual Operation P.44
●
Manual Operation Screen P.45
●
Tool Change Manually P.49
●
Dummy Tool P.50
●
Tool Change in the Job P.51
●
Adjust Depth of Cut P.52
●
Make Hole for Registration Pin on Board P.53
Procedure for Fabrication P.54
●
Display Milling Data P.55
●
Prepare Tools for Working with Standard FR-4 P.56
●
Start Job P.57
●
Adjust to Call Up the Manual Operation Screen P.58
●
Set P1 Point and Confirm P2 Location P.59
●
Size of Board Material P.60
●
Adjust Depth of Cut P.61
●
Drill (Top) and Mill (Top) P.62
●
Turn Over the Board P.63
●
Mill (Bottom) P.64
●
ESC Key to Pause P.65
●
Redo P.66
●
Mill Selectively P.67
●
Start Job (Routing) P.68
●
Ensure Depth of the Cut (Routing) P.70
Step Milling P.71
●
Step Milling P.72
●
Calibrate Thickness P.74