MITS Eleven Auto FPZ-31AT, Command Manual, Page: 47 / 108

46
P1 P2 P3
It will move the spindle head to the point of the button clicked.
To P0 (standby points)
It will move the spindle head to the standby point.
ATC
It will change the tool bit.
Move distance
You can input the distance of the spindle head movement for each click on the button
(FRONT BACK LEFT RIGHT button).
Set P0
It will set the standby point.
Standby Point – Position used to check the milling results or to turn the substrate over. It
can be set manually.
Setting – Move the spindle head to the position where you would like to set it at the
standby point and click “Set P0”. The machine will keep the position data once it is set
even if the computer or machine is turn off after. To change the standby point, simply go
through the same procedure.
Drill Wait
You can input the wait time (the time while spindle head is in DOWN position) during the
hole drilling process.
Dry run
You can input the velocity of the spindle head movement in X and Y-axis directions while
the spindle head is in UP position.
Mill spd.
You can input the velocity of the spindle head movement in X and Y-axis directions while
the spindle head is in DOWN position.
Thickness
You can input the thickness of the substrate which will be processed.