92
[x] Second Stage
This feature sets the operation of the common alarm for two stage system.
Panel Configuration/Features/Agency selection
Jurisdiction
[ ] ULI
[x] ULC
This feature selects the agency having jurisdiction for the panel.
Panel Configuration/Features/Auto test
Auto test
[X] Enabled
This feature lets you change the NFPA device periodical self-test to enabled or disabled.
Panel Configuration/Features/Multi Address Det.
Multi Addr. Detection
[ ] Enabled
This feature lets you change the method that the panel uses for regularly detecting
devices with the same address.
Enable this option to
detect duplicate addresses by measuring the overcurrent on the
loop. Disable this option to detect duplicate addresses through AP commands
.
PANEL CONFIGURATION/2. ADDRESS CFG.
Allows user to select up to what address a CLIP device would go. Loop Selection Prompt:
Loop number
Loop: __
User is prompted to introduce address upper limit; press the “#” key to move cursor to the left,
press the “*” key to move cursor to the right:
Reserved addr. space
size for CLIP device
for the current loop
Choose from 1-99:__
PANEL CONFIGURATION/3. DEVICE LABEL
Allows you to edit the device label.
Sounder Base: N
Select Y if you want to edit the label for a sounder base. Otherwise select N.
Enter the device loop and address.
Device address:
Loop: _ Addr:___
Summary of Contents for FX-3500RCU
Page 2: ......
