53
Press the
UP
and
DOWN
cursor keys to scroll through all the devices on the loop for which the
report is available.
In this display “Crt.” indicates report line number, “S/A” indicates device current subaddress,
“Parm#” indicates parameter number from the current subaddress, and “Val#” indicates the
parameter value.
13.
Multi-addresses
This option reports devices that have the same address.
If the panel is connected to a printer, select an output source:
If you selected “Printer”, select the address range. “All” selects all addresses from all
configured loops and “Loop” selects addresses from one loop.
If you selected “Loop”, enter a loop number:
If the panel does not have a printer connected or if you selected “Screen”, the following screen
appears:
Select “yes” to
detect duplicate addresses using AP commands.
Select “no” to
detect duplicate addresses by measuring the overcurrent on the loop
.
Press the
UP
and
DOWN
cursor key scroll through the devices.
If you selected “yes”, the message “*** Multiple dev address” appears beside the devices
with the same
address
.
If you selected “no”, the message “*** Multiple dev address” appears beside the address
that is shared by more than one device.
Crt. S/A Parm# Val
1 000 01 002
2 000 02 034
3 000 02 003
- Report To -
1. Printer
2. Screen
1. All
2. Loop
Loop Number
Loop: _
Digital method ?Y
Loop 1 Addr. 107
Serial no:971C2A6D
Tested
Summary of Contents for FX-3500RCU
Page 2: ......